JINK MagSwitch 8E Pro – iPad Magnetic Wall Charger
JINK MagSwitch 8E Pro – iPad Magnetic Wall Charger
JINK MagSwitch 8E Pro
A magnetic wall charging system for a compatible iPad, combined with a Matter over Thread smart switch in an 86 mm architectural format. It creates a removable Apple Home control position without turning the tablet into permanent wall hardware.
Before You Order
- Confirm the iPad model: charging compatibility depends on the exact tablet, magnetic charging backplane, connector position and case.
- Matter controller required: use a compatible Matter controller in the ecosystem selected for the installation.
- Thread Border Router required: the smart-switch function uses Matter over Thread.
- 86 mm wall box: verify the wall-box format, depth, wiring and finish before purchase.
- Professional installation: mains wiring should be completed by a qualified electrician or smart-home professional.
Key Features
- Magnetic docking and charging position for a confirmed compatible iPad.
- Removable tablet format for Apple Home dashboards, room control and supported automations.
- Matter over Thread smart-switch connectivity.
- Six finishes: Gray, White, Blue, Green, Red and Orange.
- Integrated 86 mm wall format for residential and professional installations.
Apple Home and Matter
Add the smart-switch function through the compatible Matter ecosystem using the product’s Matter setup code. Apple Home use requires a compatible Apple home hub and Thread Border Router. Available scenes, automations, remote access and voice functions depend on the selected ecosystem, software, controller and region.
iPad Compatibility
This product is not manufactured or endorsed by Apple. Apple, Apple Home and iPad are trademarks of Apple Inc. Do not assume universal iPad compatibility. Send the exact iPad model and a photo of any protective case before ordering.
Technical Specifications
| Product | JINK MagSwitch 8E Pro |
| Function | Magnetic iPad wall charging position and Matter over Thread smart switch |
| Wall format | 86 mm |
| Dimensions | 85.8 × 86 × 37.55 mm |
| Input | 100–275 V AC, 50/60 Hz |
| Maximum resistive load | 16 A maximum; final allowable load depends on wiring, load type and local requirements |
| Operating temperature | 0–40°C |
| Operating humidity | 0–95% RH, non-condensing |
| Wireless protocol | Matter over Thread |
| System requirement | Compatible Matter controller and Thread Border Router |
What’s in the Box
- JINK MagSwitch 8E Pro chassis in the selected finish
- Magnetic charging backplane
- Anti-scratch adhesive backings
- Mounting hardware and product instructions
Confirm tablet compatibility, wall-box format, wiring and smart-home infrastructure before ordering.
