No labels. No limits. Your habits become the interface.
A Canvas, Not a Keyboard
The JINK 6‑Button Wireless Switch arrives with a clean, unmarked faceplate. We deliberately chose not to print any function labels on the six buttons. Why? Because we believe the most intuitive smart home is the one you build yourself — one tap, one routine, one muscle memory at a time.
Every room in your home can use the same switch. You decide what each button does.
Out‑of‑the‑Box Behaviour
Column Buttons Default Mode
Left (three buttons) Top / Middle / Bottom On/Off (Relay) – works like a traditional electrical switch, cutting power to the connected light.
Right (three buttons) Top / Middle / Bottom Scene Mode – fully customisable via the Apple Home app (or any Matter‑compatible platform).
---
The “Ten‑Tap” Trick – Turn Any Relay Button into a Scene Controller
If you want a left‑column button to control smart bulbs without cutting their power (so they never go offline), simply press that button rapidly ten times.
· After the ten‑tap sequence, the button switches from Relay (On/Off) to Scene Mode – it will no longer cut the circuit; instead, it sends wireless commands.
· To revert to Relay mode, press ten times again.
This gives you the freedom to repurpose all six buttons as scene triggers, while keeping your smart bulbs always online.
---
Recommended Layout – A Proven Habit for the Whole Home
You are free to program the buttons however you like. The following layout has become a favourite among our users. It creates a consistent, muscle‑memory‑friendly interface across any room.
Button Position Recommended Action Gesture
Top‑Left (Left‑1) Room lighting (e.g. living room main light) Single‑tap: On/Off Long‑press: Turn off all lights in the room
Top‑Right (Right‑1) Curtain / blind control Single‑tap: Open/Close Double‑tap: 50% open Long‑press: Fully open or fully close
Middle‑Left (Left‑2) Music / media Single‑tap: Play/Pause Double‑tap: Next track
Middle‑Right (Right‑2) Custom scene (e.g. Movie Mode) Single‑tap: Activate scene
Bottom‑Left (Left‑3) Ambience scene (e.g. Reading Mode) Single‑tap: Activate
Bottom‑Right (Right‑3) Whole‑home master control Single‑tap: All off (lights, curtains, AV devices) Double‑tap: All on (welcome home scene)
---
Under the Hood – Matter over Thread
· Matter certified – Works natively with Apple Home, Google Home, Amazon Alexa, and any Matter‑compatible ecosystem. No proprietary gateway required.
· Thread mesh – Low‑power, self‑healing network. The more Thread devices you add, the more robust your network becomes.
· Battery‑powered – Long battery life (typically over a year, depending on usage). No wiring needed – stick it on any wall or place it on a table.
---
Installation Freedom
· No neutral wire required – Works with standard 86mm back boxes or surface mounting.
· Two mounting options – Adhesive tape (rental‑friendly) or screws.
---
One Sentence to Remember
Six buttons, no labels. Ten taps to toggle relay/scene. Your habits become the legend.
JINK 6‑Button Wireless Switch – Let every button become the one you need.